Electrical contact type pressure gauge
with Cr plated Zn case
Type: P542, P543
 
Service intended
 
P542 and P543 series are designed for a local reading of measured pressure and equipped with the electrical contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the set points. These are also designed to direct the leakage of insulating oil inside the electric cable.
 
Nominal diameter
 
100 and 150 mm
 
Accuracy
 
±1.0 % of full scale
 
Scale range (MPa, kPa, bar)
 
-0.1 ~ 0.6 MPa to -0.1 ~ 1 MPa
-0.1 ~ 0.3 MPa
 
Working pressure
 
Steady : 75 % of full scale value
Over range protection : 130% of full scale
 
Working temperature
 
Ambient : -40 ~ 65 °C
Fluid : Max. 100 °C
 
Degree of protection
 
EN60529/IEC529/IP67
 
Temperature effect
 
Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.4 % per 10 ℃ of full scale
 
 
Standard features
 
Pressure connection
Stainless steel (316SS) Threaded entry, radial
 
Element
 
Stainless steel (316SS) C type bourdon tube
 
Case
 
Nickel plated zinc for 100 mm (P542)
Triple setpoint only 316SS 100 and 150 mm (P543)
 
Cover
 
Nickel plated zinc for 100 mm
Triple setpoint only 316SS 150 mm (P543)
 
Window
 
Safety glass
 
Movement
 
Stainless steel
 
Dial
 
White aluminium with black graduations
 
Pointer
 
BsT3 alloy, black painted pointer with gold plated
 
Contact
 
Contact : Dual set point or triple set point
Contact rating : AC 110 V, 0.5 A/AC 220 V, 0.25 A
Dielectric strength : AC 2,000 V/min insulation
Insulation resistance : More than 100 MΩ at DC 500 V
 
Process connection
 
⅜" PF
 
 
Download:  CATALOG